Dalian Baiyun Electromechanical AE-25T L08D16 Tube Bundle Extractor

For heat exchanger tube bundle extractors using chain drive or belt drive, chains or belts are important components of the transmission system. When selecting chains or belts, factors such as their type, specification, load-carrying capacity, elongation rate, and wear resistance need to be considered. Meanwhile, the tensioning and lubrication of chains or belts are also issues that require attention in the design. For transmission systems that need to operate continuously for a long time, chains or belts with better wear resistance and anti-fatigue performance may be selected. For heat exchanger tube bundle extractors using hydraulic or pneumatic transmission, hydraulic cylinders or pneumatic cylinders are key components for realizing linear motion. When designing hydraulic cylinders or pneumatic cylinders, factors such as their cylinder diameter, stroke, working pressure, and material need to be considered. Dalian Baiyun Electromechanical's AE-25T L08D16 tube bundle extractor adheres to the consistent policy of taking customer satisfaction as the eternal standard.

Tube bundle extractor

When selecting a reducer, factors such as its reduction ratio, torque capacity, efficiency, noise, and maintenance cost need to be considered. For transmission systems that require frequent starting and stopping, a reducer with a larger torque capacity and higher efficiency may be selected. The transmission shaft is the main component in the transmission system that transmits torque and power. When designing the transmission shaft, factors such as its material, diameter, length, bending strength, and torsional strength need to be considered. At the same time, bearings, as key components supporting the transmission shaft, also need to be carefully selected and designed. Common types of bearings include rolling bearings and sliding bearings, each with its applicable occasions, advantages, and disadvantages. When selecting bearings, factors such as their load-carrying capacity, friction coefficient, service life, and maintenance cost need to be considered. Dalian Baiyun Electromechanical's AE-25T L08D16 tube bundle extractor meets the needs of different levels.

Before operating the heat exchanger tube bundle extractor, operators must wear personal protective equipment, including safety helmets, protective glasses, protective gloves, protective clothing, and anti-smashing shoes. These equipments can effectively prevent injuries caused by splashing debris, high-temperature liquids, or chemical substances during operation. Operators should be familiar with the operating specifications and safety operating procedures of the heat exchanger tube bundle extractor, and understand the equipment's performance parameters, operating methods, and precautions. During the operation, they should strictly follow the operating specifications and must not arbitrarily change or omit operating steps. During the core pulling operation, operators should pay close attention to the operating status of the core pulling mechanism and the movement of the tube bundle. If any abnormality is found, they should stop the machine in time and report it.

The clamping mechanism is an important part of the heat exchanger tube bundle extractor, and its main function is to ensure that the heat exchanger tube bundle is firmly clamped during the core pulling process to prevent falling off or damage. Compared with traditional cleaning methods, the cleaning function equipped with the heat exchanger tube bundle extractor has the following obvious advantages: the cleaning function of the heat exchanger tube bundle extractor usually adopts automatic and intelligent control methods, which can realize rapid cleaning of the tube bundle. Compared with manual cleaning, it greatly improves cleaning efficiency and reduces labor intensity and production costs. Traditional cleaning methods often require operators to enter the equipment or contact dangerous environments such as high temperature and high pressure, which has greater potential safety hazards. Dalian Baiyun Electromechanical has cultivated and retained an excellent professional R&D team, and has long hired industry technical personnel as technical consultants for the company.

Heat exchangers are equipment used for heat exchange in the power industry, with complex internal tube bundle structures. During long-term use, a large amount of dirt and impurities may accumulate inside the tube bundles of heat exchangers, affecting heat exchange efficiency. The tube bundle extractor/loader, equipped with professional cleaning devices and cleaning agents, can realize thorough cleaning of the inside and outside of the tube bundles, thereby improving heat exchange efficiency and service life. Coolers are equipment used for cooling in the power industry, with equally complex internal tube bundle structures. The tube bundle extractor/loader can realize fast and accurate extraction and loading of the internal tube bundles of coolers through efficient extraction and loading technology, ensuring the stability of the cooling effect. In the application of the power industry, the tube bundle extractor/loader also needs to meet the requirements of high efficiency, stability, safety, and adaptability. Dalian Baiyun Electromechanical ensures quality and provides more assured after-sales service!

Dalian Baiyun Electromechanical's AE-25T L08D16 tube bundle extractor, confidence comes from our professionalism. During operation, it is necessary to keep the equipment clean and hygienic. Timely clean the oil stains and dust on the surface of the equipment to prevent them from affecting the normal operation and heat dissipation effect of the equipment. At the same time, it is necessary to regularly check the cleanliness of the equipment and clean it in time if there is any contamination. Pay attention to the equipment status: during operation, it is necessary to closely observe the operating status of the equipment. In case of abnormal conditions, such as excessive vibration, excessive noise, excessive temperature, etc., the machine should be stopped immediately for inspection and troubleshooting. At the same time, it is necessary to regularly maintain and service the equipment to ensure its long-term stable operation. Avoid overloading: when operating the equipment, it is necessary to avoid overloading. Arrange the workload and time reasonably according to the specifications and performance parameters of the equipment. If long-term or high-intensity work is required, the equipment should be allowed to rest appropriately and its status should be checked.